|
|
A Paper from HKUST professor.
Abstract—A systematic and unified method using the signal flow graph (SFG) technique is presented in analyzing dc–dc pulsewidth modulated (PWM) switch mode power converters (SMPC’s) operating in the continuous conduction mode (CCM).
Loop gains for single and multiloop systems are reviewed. The SFG of the converter is then generated from the perturbed state-space averaged (SSA) equations, and the characteristic polynomial of the system is computed. By grouping terms associated with the gain of the error amplifier as the numerator, a unique definition of system loop gain is introduced, and locations for breaking the loop are discussed. System loop gains for both voltage- and current-programming converters with either trailing- or leading-edge modulation are derived. It is shown that
for a SMPC, the loop gain measured by an analog injection method is the system loop gain, which determines the stability of the converter.
Index Terms—Loop gain analysis, signal flow graph analysis, switch mode power converters.
|
本帖子中包含更多資源
您需要 登錄 才可以下載或查看，沒有帳號？申請會員
x
|
[複製鏈接]
IP卡
狗仔卡
發表於 2009-7-8 15:55:20
QQ好友和群
QQ空間
騰訊微博
騰訊朋友
收藏
分享
頂
踩
分享
提升卡
置頂卡
沉默卡
喧囂卡
變色卡
搶沙發
千斤頂
顯身卡