A famous IC company looking for Analog IC circuit design

ranica · 發表於 2012-3-15 08:06:56

招聘公司：A famous IC company
招聘岗位：LTE Full Stack Test Engineer
工作地点：Beijing

岗位描述：
1. Design LTE full stack test cases based on requirements, including writing the test specification. 2. Develop test scripts based on test instrument, especially on Anritsu’s 8430/R&S’s CMW500. 3. Set up LTE full stack test environment and perform testing on target platform. 4. Analyze the issues during testing and locate the root cause. 5. Provide the effective test report and test result with high quality. 6. Cooperate with developers to fix the bugs and verify the bugs. 7. Support developers in earlier phase and later phase.

ranica · 發表於 2012-2-22 15:09:19

招聘公司：a top 15 semiconductor company
招聘岗位：application engineer
工作地点：Beijing

岗位描述：
Responsibilities: - Responsible for providing technical support on Analog Devices Linear product portfolio to Asia customers. - Responds directly to customers on technical inquiries initiated via Email, phone or internet forums - Interacts on a global basis with Product experts and the entire global Technical community for escalation and ensuring that enhancement requests or other issues can be addressed - Understands customer's technical needs and problems - Provides support based on differentiated service level agreements - Applies Signal Chain and solutions/applications knowledge for cross-selling and part recommendation - Collaborates with Sales and Frontend colleagues on new opportunity identification - Attends online seminar, Trade shows and seminars for live customer or other product demo support on request - Deals directly with technical contacts from our Distribution network to support them with trainings and their customers - Contributes with technical inputs to self-service tools and applications provided to our customers

职位要求：
Requirements: - Solid analog, digital and mixed signal processing basics is required - Any of below skill and experience is preferred: Power management circuit design experience Embedded software development PC software development capability - Good English skill. - Good communication skill and team work. - 1~2 year working experience. - EE Bachelor or Master degree, master is preferred.

ranica · 發表於 2012-2-22 15:08:39

职位要求：
Job Requirements:
1. Need 4 to 6 years direct experience working related to RF PA's or RF baseband processor in cell phone design and also DC-DC regulators knowledge to be effective.
2. Need good lab skills to debug circuit boards, familiar with lab equipment and with PCB design capability.
3.Good RF skills with clear understanding for transmission line theory, matching networks and distribution circuits; good understanding for RF active/passive circuits and antenna theory.
4.Good understanding for GSM,CDMA,WCDMA,TD-SCDMA, WiFi, WiMax and LTE standard.
5.Be familiar with MATLAB, ADS and other microwave simulation software is preferred;
6.Good English communication and documentation skills, good team player.
7.Master degree or above with emphasis in electronics principle and electromagnetic field technology ,excellent bachelor may be considered. 8. Domestic and international traveling is required

ranica · 發表於 2012-2-22 15:08:33

招聘公司：A famous IC company
招聘岗位：Sr.Application engineer
工作地点：Shanghai

岗位描述：
Job Description:
1. Report to Product Line directly to provide 2nd level customer support.
2. Operate Oscilloscopes, Spectrum Analyzers, Network Analyzers, Signal Generators and wireless communication stations for customer Power spec ,RF Test, EMI issue support and make nice training for local FAE and customers.
3. XX Existing RF DC-DC Application solution and complicated customers' issue debug with FAE.
4. XX RF DC-DC SCH&PCB system design review for Asia key mobile customers.
5. Creative application circuit design for key customers' specific demand and PL’s maintenance new product definition.
6. Generate test report and application notes in both English and Chinese
7. Define Fairchild next generation RF Power product from smart phone system and wireless communication standard’s evolutional perspective.

ranica · 發表於 2012-2-15 15:44:57

招聘公司：a leading developer of advanced digital imaging solution
招聘岗位：Marketing Director
工作地点：Shanghai

岗位描述：
Responsibilities： Ø Responsible and coordinate with Sales/PM for China forecast and pricing strategy, new product trend; Ø Responsible for all marketing and business strategy in driving growth within the China market. Ø Ability to define product roadmaps and positioning, and market development to meet current and future market requirements; Ø Strong ability to market to tier one customer and to grow business through strategic partnerships;

职位要求：
Requirement: A strong passion for driving results and excellent collaboration and communications skills required. Ø The ideal candidate will be a dynamic leader and strategic thinker with a strong understanding of the imaging sensor marker and technologies; Ø Strong verbal, written and communications skills are required in both Mandarin and English; Ø BSEE/CS and 7 years cell phone market related experience is required; Ø MSEE or MBA preferred.

ranica · 發表於 2012-2-15 15:44:01

招聘公司：A communications chip company
招聘岗位：战略管理高级经理
工作地点：Shanghai

岗位描述：
职位主要职责推进公司的战略研究工作；推进公司的战略规划制定和调整工作；推进公司战略实施工作，配合推进公司以及公司控股股东的重大对外投资/并购项目。

职位要求：
技能标准熟练应用SWOT分析模型、波士顿矩阵、价值链分析法、波特竞争模型、平衡计分卡等战略管理工具来分析研究公司发展的内外部环境及经营策略；对移动互联网行业有深入的了解，熟悉整个产业链的运作规律；较强的分析、协调、逻辑判断能力，对各种信息的综合、总结能力；较强的团队协作，上通下达的协调能力。必备知识、经验及素质本科及以上学历，工商管理（战略管理）、金融学（投资银行）等相关专业；5年以上战略管理工作经验，相应岗位3年以上工作经验，掌握战略多个模块管理及操作流程，精通某一专业领域知识，全面了解移动互联网行业；诚信正直、敢担当，善于总结和传承。行为能力有很好的计划和执行能力、善于学习、总结。

ranica · 發表於 2012-2-15 15:43:16

招聘公司：A communications chip company
招聘岗位：对外合作经理
工作地点：Shanghai

岗位描述：
职位主要职责基于现有的产业链定位，挖掘和识别对外合作需求；组织制定对外合作计划，完成合作项目调研及评估；组织完成对外合作项目合同起草与商务谈判工作；组织完成对外合作项目计划、执行以及监控等工作。

职位要求：
必备知识、经验及素质本科及以上学历，通信、电子、经济、贸易等相关专业；精通通信移动互联网行业知识,5年以上相关行业工作经验，3年以上相关岗位工作经验；精通项目管理知识,拥有丰富经验; 精通商务谈判;

ranica · 發表於 2012-2-15 15:41:37

职位要求：
SKILLS Essential:  Team working.  The position requires an understanding of: o SoC: Processor architectures, AMBA bus, Standard Ifs ( USB, Eth, ) o Application experience in complex SoC/ASSP, including embedded SW, in relation with meter and communications aspecy (PLC, Rf-Wireless communications, Metrology, etc_ o ASIC Flow  He/She has got work experience as FAE, ASIC Design Center Eng. and/or ASIC-IPs Design Engineer. Desirable:  Work experience as IP and/or ASSP Design Engineer  Telecomm experience on Wireless and Wired protocols (RF, ZigBee, IMS-Industrial, PLC, etc.) from Physical Layer to upper protocol (MAC, Adapation Layer, Newtoking)  Knowledge of sales and marketing principle. Specific interpersonal and communication skills:  Working in an international team  Close Customer relationship, strong communication (verbal, written) & presentation skills including the ability to conduct business in English.  Effectively work with others including Customer and ****** colleagues (Organize and prioritize work activities in an independent manner).  Enjoy working across multiple geographies and cultures.  Traveling within Europe and outside Europe will be necessary. BUSINESS METRICS & SUCCESS INDICATORS: The success of the Application Eng.’s is measured in accountable terms on business-related parameters as: • Yearly Design wins • Bookings Furthermore the other key parameters and indicators to measure his/her success are: • Influence on IP & product definition • Support of collaterals generation ( manual, Application Notes, White papers) • Support of IP validation and certification • # of design wins versus processed RFQs • RFQs proposal lead times

ranica · 發表於 2012-2-15 15:41:21

招聘公司：A famous IC company
招聘岗位：APPLICATION ENGINEER (AE)
工作地点：Shanghai

岗位描述：
JOB DESCRIPTION RESPONSIBILITIES & INTERFACE The Application Eng., under the coordination of VP Smart Grid Solution, is responsible for actively promoting ****** technical capabilities and Product offering among Customers and Prospects. She/He is accountable for insuring (i) Correct understanding of Customers’ technical requirements (ii) Professional feasibility analysis (iii) Effective coordination with ****** Sales and Engineering team (iv) Efficient Customer technical interface (v) Comprehensive technical solution build-up, ensuring customer requirements are reviewed to determine product applications, problems are investigated and resolved (vi) Reference and Evaluation Kit Development with related Collaterals-Documentations 3.1 Upstream interface The Application Eng. reports to the VP Smart Gird Solutions 3.2 Downstream interface Not Applicable 3.4 Main processes interactions Sales & Customer Relationship Process Pre-sales To coordinate internal organizations in order to bring ****** offering to meet Customers’ expectations, both in terms of quality as well as in terms of technical solution. In the Pre-Sales Phase, the Application works in cooperation with Sales, SW , Engineering and Operations teams to provide a competitive technical solution to build the budgetary proposal to be presented to the Customer. The ultimate goal (to be accomplished as a team) is to secure the design win for XX while matching Customer’s needs. RFQ processing lead-times have to be provided within ****** internal guidelines. MAIN DUTIES Application main duties are:  Feasibility analysis and solution proposals for Platform-ASSP, SoC-ASIC discussing with Customers architecture requirements and related trade offs.  To ensure Customer’s requirements are investigated to determine product applications, problems are investigated and resolved, and technical interface between Customers and Engineering. Drive technical discussion with Customers during RFI/RFQ phases & attend to Design reviews with Customers, especially in relation of specific XX’s complex IPs (uP Subsystems, PLC, Metrology, RF)  To coordinate BP preparation (technical part, effort etc.), in line with ****** quotation procedure, providing for ASIC-SoC opportunities also input for CS generation, consolidating CS including IP-section for final Sales tuning  To provide, develop and foster enhanced interpersonal relations with personnel (Engineers, Managers…) of key Customers to improve Customer relations, resolve technical issues, etc. to position XX as vendor of choice.  Technical product presentations, Evaluation Kits & Products demonstrations during the discovery and advocating process. Demonstrate Product-IP capabilities with related Product-IP Evaluation Kits & demo systems.  Contribute to Evaluation Kit Specification, design and validation (MRD/PRD process, PCB Design, Ev.Kit productization, Collaterals generation)  Support Field tests and Certification process for specific IP-Standards  Support Customers benchmarks  Provide Customers feedback to ******for new and emerging technologies, as well as competition information  Support of exhibitions, road shows and conferences  Identify and assist in research of Sources of IPs  Identify and assist in research of Sources of Technologies/Foundries  Develop technical Product and Evaluation Kits Collaterals (Manuals, System Solution Application Notes, White Papers, etc.)  Develop training & Collaterals material (Presentation for Sales EDUCATION & EXPERIENCE The Application holds a degree in electronic engineering or physics. He/She has at least 5 years experience in the same or equivalent position or relevant Eng. Experience (HW, SW, System) Strong semiconductor experience is a must.

ranica · 發表於 2012-2-3 16:57:53

招聘公司：a start-up company with high performance bletooth and Wifi technology
招聘岗位：RF/analog IC design engineer
工作地点：Shanghai

岗位描述：
Job description The candidate will be responsible for CMOS RF and analog circuit schematic design, layout design, RFIC test and debug for wireless communication systems such as Bluetooth, WiFi, etc. The candidate must have design and tape-out experience on etc. Responsibilities - Design RF/analog block circuit meeting the system requirements - RF/analog block circuit layout design and post-simulation - RFIC test and debug - Documentation and report about the designed circuit blocks

职位要求：
Qualifications - BS or above, Electrical Engineering - 2 year’s or more industry experience is must - Tape-out experience is must - Knowledge about RF system, device modeling - Knowledge about bulk CMOS process - Familiar with Cadence tools including spectre, spectreRF, ultrasim, virtuoso, and calibre LVS/DRC/PEX, etc - Familiar with spectrum analyzer, oscilloscope, vector network analyzer etc - Good English communication skills - Self-motivated emphasis on teamwork, schedule, plan and delivery - Bluetooth and WiFi circuit development experience is preferred

ranica · 發表於 2012-1-11 14:56:55

职位要求：
Qualifications Leading the project office organization worldwide Support R&D line managers and Program Manager in the demand planning for new projects and management of the project pipeline Define KPI/measures on R&D efficiency and work closely with RD management to improve organization efficiency Drive project management methodology, configuration management methodology. Ensure that projects are set up and executed according to development process * Support project and program managers in: - Structuring of the system / hardware / software project - Tailoring of the process and definition of synchronization milestones - Consulting for System Verification Concept - Consulting for setup of project infrastructure (IPP, configuration management, @risk) * WLS DP Training of project managers Support Project configuration management (Change Management via Unified Tracking Platform), Product structure setup and maintenance. Local R&D Project Management Tool support (MS Project Enterprise etc) Best Practice Sharing and Continuous Improvement, Lessons Learned moderation Tracking Key Performance Indicators for R&D in cooperation with R&D Line Management * KPIs for overall WLS R&D performance * KPIs for productivity of R&D sites * KPIs for productivity of outsourcing partners Analyzes Key Performance Indicators within the R&D community and ensures that data collection leads to improvement programs Defines operative and performance R&D reporting in cooperation with Business Line and R&D Line Management

ranica · 發表於 2012-1-11 14:56:50

招聘公司：A famous IC company
招聘岗位：Head of Project Office(Worldwide)
工作地点：Xi'an

岗位描述：
Responsibilities In this position, your key responsibilities include below but not limited to: Solid know-how in usage of project management tools Expert knowledge in the system development framework Strong analytical skills and systematic working style Excellent presentation skills Fluent English is a must > 5 years technical experience in product development Project Management Experience in hardware, software, technology or system project management Experience of working with different cultures

ranica · 發表於 2011-12-6 14:31:13

招聘公司：A fabless IC design company
招聘岗位：系统工程师
工作地点：Beijing
岗位描述：
主要职责：为客户提供系统应用的参考方案和相关文档，指导FAE解决客户在实际应用中的技术问题，配合销售部完成销售目标。

职位要求：
职位需求： - - 计算机、通信、电子工程类专业，本科及以上学历。英语CET-4级以上水平，良好的英文读写能力； - 熟悉通信和网络的基本知识，了解通信系统或民用消费类产品的框架结构及应用领域； - 有国内外知名通信公司通信产品或数字电视、机顶盒产品开发经验者优先； - 具备较强的芯片级理解能力，对高速SerDes、以太网接口芯片、交换芯片、数字电视内芯片、ADC其中之一以上的芯片有深入的研究或应用，可以很准确的知道芯片的指标含义和解释； - 具有2个中型项目或1年以上的单板硬件、底层驱动、单板逻辑三种工作开发经历； - 能够独立调试电源、CPU、FPGA及ASIC芯片，熟练掌握 Cadence或PowerPCB等软件，熟知 PCB 的布线规则和产品的生产流程； - - 根据电子线路原理图产生网表，配合信号约束和结构条件进行PCB Layout, 并生成 Gerber 和 SMT 相关文件；2、- 负责公司PCB、原理图和BOM表的整理和归档工作；跟踪解决生产线上出现的生产工艺问题;根据项目要求选择合适的 PCB 供应商和元器件供应商； - 具备敏锐和快速的反应能力；良好的思维能力、信息收集、分析能力； - 良好的团队合作意识和沟通能力； - 适应经常出差，勤奋刻苦，爱岗敬业。

ranica · 發表於 2011-11-21 15:49:52

招聘公司：A communications chip company
招聘岗位：协议软件工程师
工作地点：Shanghai

主要职责： 1.协议软件的系统调拭、问题分析解决和技术支持 2.协议软件模块的开发维护和集成测试
职位要求：
所需资历： 1.学历/所受培训：本科及以上学历，计算机、通信、信息与信号系统等相关专业； 2.其他要求：有意愿在无线移动通信领域和终端行业发展；积极主动，沟通良好；英语读写良好；具备较好的逻辑思维能力；有一定的C编程基础。

ranica · 發表於 2011-11-21 15:49:09

招聘公司：A communications chip company
招聘岗位：物理层协议软件工程师
工作地点：Shanghai

岗位描述：
工作目的和性质：根据部门安排，承担无线通讯领域终端物理层协议关键技术研究，开发并维护符合公司产品/项目目标需求的物理层协议软件组件，支持物理层协议软件组件的产品化集成应用。主要职责： 1.跟踪GSM/TD-SCDMA/TD-LTE等无线通信标准的演进，执行相关标准的产品化技术研究。 2.执行基于GSM/TD-SCDMA/TD-LTE等无线通信标准的终端物理层协议软件组件开发、测试和维护，对工作进度和质量负责。 3.参与物理层协议软件组件的产品化集成应用工作，对物理层协议软件组件在产品系统中的功能和性能负责。 4.分析解决产品商用过程中的物理层协议相关问题，对技术问题的解决进度和质量负责。

职位要求：
所需资历： 1.学历/所受培训：通信、计算机软件、电子工程等专业学士以上学历。 2.工作经验： ⑴.具有良好嵌入式系统软件开发经验，能熟练使用C/C++和嵌入式汇编从事DSP软件开发。 ⑵.熟悉2G/3G/4G等无线通讯标准，具有无线通讯设备或终端物理层协议软件开发和测试经验。 3.其他要求 ⑴.良好的沟通表达能力，团队协作性好。 ⑵.质量意识，责任意识强。 ⑶.良好的中、英文读写能力。

ranica · 發表於 2011-11-21 15:48:42

招聘公司：A communications chip company
招聘岗位：物理层算法软件工程师
工作地点：Shanghai

岗位描述：
工作目的和性质：根据部门安排，承担无线通讯领域终端物理层算法关键技术研究，开发并维护符合公司产品/项目目标需求的物理层算法软件组件，支持物理层算法软件组件的产品化集成应用。主要职责： 1.跟踪GSM/TD-SCDMA/TD-LTE等无线通信标准的演进，执行相关标准的产品化技术研究。 2.执行基于GSM/TD-SCDMA/TD-LTE等无线通信标准的终端物理层算法软件组件开发、测试和维护，对工作进度和质量负责。 3.参与物理层算法软件组件的产品化集成应用工作，对物理层算法软件组件在产品系统中的功能和性能保障负责。 4.分析解决产品商用过程中的物理层算法相关问题，对技术问题的解决进度和质量负责。

职位要求：
所需资历： 1.学历/所受培训：通信、信号处理、应用数学/物理等专业学士以上学历。 2.工作经验： ⑴.具有良好嵌入式系统软件开发经验，熟练使用C/C++和嵌入式汇编从事DSP软件开发。 ⑵.理论基础扎实，具备信号处理算法设计、仿真分析、和实现经验，能熟练从事物理层算法的产品化应用开发工作。 ⑶.熟悉2G/3G/4G等无线通讯标准，具有无线通讯终端物理层协议/算法软件开发和测试经验，能够从终端物理层过程的效率出发进行算法软件组件的优化设计。 3.其他要求 ⑴.良好的沟通表达能力，团队协作性好。 ⑵.质量意识，责任意识强。 ⑶.良好的中、英文读写能力。

ranica · 發表於 2011-11-21 15:48:12

招聘公司：A communications chip company
招聘岗位：算法工程师
工作地点：Shanghai

主要职责：终端物理层算法研究和优化

职位要求：
任职要求： 1、具有电子通信、信号处理等相关专业本科及以上学历，有志于移动通信研发 2、本科两年或硕士一年以上工作经验 3、有良好的移动通信知识，熟悉信号处理、均衡、编译码、多天线等通信基础原理 4、熟练使用Matlab等仿真工具，熟练使用C语言 5、能熟练阅读英文文献，较强的沟通能力和自学能力 6、有信道估计、编译码、OFDM、MIMO等技术研究经历者优先考虑 7、熟悉GSM、TD-SCDMA、LTE、WCDMA产品原理、通信协议者优先考虑

tk02561 · 發表於 2011-11-14 16:17:36

职位要求：Requirement:

 MSEE or PHD in EE related majors. 4+ years working experience for Master, 2+ years for PHD.
 Proactive, and good communication.
 Transistor-level circuit design, simulation, and layout of analog /mixed-signal integrated circuit, with track record of high quality circuit design. Experience in high speed PLL design is a strong plus.
 Solid understanding of device physics. High level of mathematical sophistication is a strong plus
 Solid problem-solving and trouble-shooting skills. Enjoy tinkering, taking things apart and making things work.
 Innovative, with ability to raise good questions.
 Self motivation, result oriented, good team work and communication skills.
 Good spoken and written English

tk02561 · 發表於 2011-11-14 16:17:30

招聘公司：a top 15 semiconductor company
招聘岗位：Experienced Analog Designer
工作地点：Shanghai

岗位描述：
Responsibility: Participate in mix-signal IC development high speed clock products, working with multi-site engineers on different functions such as analog/digital design, application, product evaluation and layout. The candidate is expected to contribute to analog circuit design, simulation, probe and debug. And the candidate should also be able to understand board level issues to make connection to real world application.

tk02561 · 發表於 2011-11-14 16:15:59

职位要求：Qualifications
 Master degree in EE related major, 2-10 years experience
 Basic knowledge on PLL and converter clocking
 Experience in software & hardware development on mixed-signal high speed system; schematic and PCB experience.
 Debugging experience with hardware and software working together on board level; familiar with common instruments such as spectrum analyzer, signal source and oscilloscope.
 Experience in any of below is a plus.
 Understand IC evaluation and performance specification measurement theory and technique
 Labview/FPGA
 Proven track record of innovative initiatives in previous projects.
 Eager to learn new things.
 Self motivating, good team player and good communication skill.
 Good English speaking and writing skill.

		自動登錄	找回密碼
密碼			申請會員