Chip123 科技應用創新平台

標題: 類比 ic design offer 選擇... 換成是你，你會如何選擇呢? [打印本頁]

---

作者: tk02376    時間: 2011-5-11 03:51 PM
標題: 類比 ic design offer 選擇... 換成是你，你會如何選擇呢?

※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 123.195.18.209
0 t! I, R1 a5 y  ^※ 編輯: coller          來自: 123.195.18.209       (05/09 22:02)
8 D5 J: `9 ~( t6 Z7 \[attach]12522[/attach]

" Y0 _8 L# b0 Y9 G7 L本人具類比/power IC設計五年多經驗,目前已拿到這四家offer,
: x: g' n7 Z# l, s目前尚未決定去哪一家,想問各位會如何選擇呢?

---

作者: ranica    時間: 2012-5-11 11:03 AM
招聘公司：A fabless IC design company
$ Y6 t) F# Z5 A; C& |+ W招聘岗位：模拟IC设计工程师（Jr/Sr）
% d+ H$ R' @4 \2 H7 ^; V工作地点：Beijing

岗位描述：
& l# I+ d. b; h) A3 R1. 设计有挑战性的模拟电路模块，比如DAC,DCDC和Op-Amp等等。 2. 指导版图设计工程师实现模拟电路的版图设计。 3. 电路版图的后仿真。
' m4 {3 p3 j/ Q5 J) Q- ]
, I% C" N2 I2 S4 p职位要求：
1. 丰富的模拟电路理论知识。 2. 具备独立设计DAC，DCDC或Op-Amp等模块的知识和经验。 3. 具备LCD驱动产品设计经验者优先。 4. 微电子学硕士或相关领域的硕士学位，2年以上IC设计经验。

---

作者: ranica    時間: 2012-5-11 11:04 AM
招聘公司：A famous IC company
招聘岗位：Senior IO Design Engineer
工作地点：Shanghai
& z- e! l* H4 P, A) G' j
+ H! R( w: M5 C$ E; U- X. M% k岗位描述：
1. Experience in IO circuit design 2. Be responsible for the schematic design, simulation and DK generation 3. Instruct the layout designer to design the circuit layout

2 y, S- k1 }+ q6 r( F职位要求：
1. M.S. in electrical engineering or equivalent is required 2. 2 or more years of IO circuit design experience 3. Experience of Spice simulation 4. Knowledge of ESD design is required 5. Process and device physics knowledge is essential 6. Strong physical layout knowledge and parasitic component understanding is essential

---

作者: ranica    時間: 2012-5-18 02:50 PM
招聘公司：A famous IC company
; l; ~3 N/ d/ ~& f3 o* Q招聘岗位：资深模拟设计工程师
' G1 g; m1 W+ u- R3 G* }0 w工作地点：上海，成都，南通
" a+ b- X. e$ l( m
8 p0 j/ n( Q# z5 k岗位描述：
1. 电源产品（只要是DCDC以及PMU产品的设计，特别是大电流DCDC产品的设计）。 2. 与销售和FAE人员一起制定产品的指标。 3. 与Foundry一起沟通选择最佳工艺 4. 指导版图工程师的布图 5. 与实验室测试工程师（AE）和量产（ATE）工程师一起制定测试方案。

# J+ Q( a. W5 z: Q9 D" a0 U& {职位要求：
/ y8 E, s- ^. [; {; a1. 本科毕业，硕士和博士毕业优先考虑 2. 5-8年以上电源管理产品的独立的设计经验，具有PMU产品的设计经验优先考虑 3. 熟悉低压CMOS，BiCMOS，以及高压LDMOS等器件的物理结构和工艺制程 4. 熟练使用英文与其他国家和区域的帝奥团队沟通。

---

作者: ranica    時間: 2012-6-20 01:57 PM
招聘公司：A famous IC company
5 y; z& a# h: s# i: T, v& V/ n4 t/ L招聘岗位：Senior Analog Design Engineering
" r8 M$ a! w5 C$ A/ }工作地点：Shanghai
" l' d& o' e1 X1 c5 X+ b8 x6 ^
: n% y0 Q0 ?" E, @! R, h0 a# g9 n$ Q" J岗位描述：
2 g3 p' k6 |4 s( z4 zIn this position, you will be responsible for: 1. High performance amplifier (low noise, high precision and high bandwidth) amplifier designs and layout guiding. 2. High definition video filter and driver design and layout supervision. 3. Support the lab test engineering on ATE and product test plan and debugging 4. Work with our sales team to support customer with XX solutions 5. Define new products with XX sales and FAE team (some travel might be needed)
- \6 W& g- h8 {# Q
: }7 K% C+ w8 c$ L职位要求：
Qualification: 1. 5+ years experience in mixed signal analog design with independent product design/tape-out and mass-production history. 2. Experience with analog video knowledge will be big plus such as video analog front-end (AFE) design experience 3. Strong local open-fabrication process knowledge 4. DCDC power product design experience is big plus but not necessary. 5. Good at English speaking and writing to work with XX team members in other country.

---

作者: ranica    時間: 2012-7-5 02:17 PM
招聘公司：A fabless IC design company
+ |3 u% ]: D/ G, D( R6 ?: u. U* G招聘岗位：IC模拟电路设计工程师
工作地点：Beijing

2 R2 \+ B! ?+ A4 A  g" E岗位描述：
工作性质：全职 工作经验：不限 学历：硕士以上 语言能力：英语 良好 主要职责： 1. 设计有挑战性的模拟电路，比如High speed Serdes, High Speed DAC, PLL等等。 2. 指导版图设计工程师实现模拟电路的版图设计。 3. 电路版图的后仿真。

$ N8 M; L8 K$ ]; N职位要求：
8 D# q8 B/ @, p6 G# Y* U1. 丰富的模拟电路理论知识。 2. 具备High Speed Serdes, High Speed DAC, PLL的知识和经验。 3. 具备高速模拟电路产品设计经验者优先。 4. 电子工程学硕士或相关领域的硕士学位

---

作者: ranica    時間: 2012-7-10 11:28 AM
招聘公司：A fabless IC design company
招聘岗位：IC模拟电路设计工程师
工作地点：Beijing
4 p, O" w2 g# W" y
岗位描述：
工作性质：全职 工作经验：不限 学历：硕士以上 语言能力：英语 良好 主要职责： 1. 设计有挑战性的模拟电路，比如High speed Serdes, High Speed DAC, PLL等等。 2. 指导版图设计工程师实现模拟电路的版图设计。 3. 电路版图的后仿真。
1 M1 S: x1 \  o. U
职位要求：
" B5 B9 A( s7 \4 e' k' M1. 丰富的模拟电路理论知识。 2. 具备High Speed Serdes, High Speed DAC, PLL的知识和经验。 3. 具备高速模拟电路产品设计经验者优先。 4. 电子工程学硕士或相关领域的硕士学位

---

作者: ranica    時間: 2012-7-10 11:29 AM
招聘公司：A us company
! j+ E' E! V1 y2 A! Q招聘岗位：FAE工程师
6 ?5 ?0 S. G3 o# p0 B; b工作地点：Shanghai、Shenzhen
) z0 R6 G& n" s. q, B
% x! B  b4 M% \, z) e2 L岗位描述：
2 J2 k0 S2 g& P6 I/ L: N- O% I1、负责客户方案的设计； 2、解决客户反馈的各种技术问题； 3、重要客户的项目设计及协助电源产品的生产; 4、配合完成销售及代理商申请的Demo板及调试。

职位要求：
1、大学本科及以上学历，电子或电气相关专业毕业； 2、扎实的电路理论基础，熟悉开关电源设计； 3、较强的动手能力，能熟练使用各种常用的电子仪器； 4、能熟练应用Layout、电路仿真等相关的计算机软件； 5、在开关电源领域2年以上的研发经验优先。 6、有一定的英语读、写能力；

---

作者: ranica    時間: 2012-7-10 11:30 AM
招聘公司：A famous IC company
招聘岗位：Field Application Engineer – Career
工作地点：Beijing

3 m. D! M3 \( H& s岗位描述：
" w  ]0 I# V1 s; |6 A• Design in XX Industry products in the industrial market segment. • Drive new product adoption by creating reference design, and provide technical support. • Gather market and competitor information and do market analysis. • Deliver new product sales training to distributors, and sales personnel • Contribute to long term product roadmaps through researching current solutions and emerging technologies in key markets space and inform our division.

0 a/ o: j8 L# [3 r# e职位要求：
5 X6 g7 |! O3 q" ?• Master/Degree in Electrical/Electronics/Semiconductor physics with minimum of 3 – 5 years experience in a electronic industry • At least 3 to 5 years of experience in working in R&D or as field application engineer in the industrial market segment or working with customers on board level designs. • Experience in customer applications such as IGBT, PLC, Servo will be added advantage. • Good written and oral English language. • Good communication skills and team player • Able to work independently.

---

作者: ranica    時間: 2012-7-10 11:30 AM
招聘公司：-A famous IC company
招聘岗位：Sr. WLCSP development engineer
工作地点：Shanghai

% h/ t  `! I( g& l. ]岗位描述：
1) Act as WLCSP RD project leader for all the WLCSP related activities. 2) Integrated with Process / Product Engineering, Production, QRA, Final Test and Maintenance teams in the WLCSP assembly problem solving. 3) Developed new WLCSP packages from feasibility, design, process development, qualification to mass production. 4) Design the new WLCSP package for new application or performance improvement. 5) Improve the WLCSP assembly processes for cost effectiveness

+ z) O9 C6 ^1 B& R4 @4 t2 ^职位要求：
(1) Bachelor, Master degree or PH.D. in Mechanical/ EE/ Automation/ Material Science, etc; (2) 10+Yr working experience of semiconductor WLCSP design/development or package R&D related field; (3) Experience with WLCSP NPI project as plus; (4) Good knowledge on mechanical design/simulation(Ansys or other software), material analysis, package assembly process, package qualification method, project management; (5) Ability to achieve results in a fast moving, dynamic environment. (6) Good team work, willing to learn, and logical thinking; (7) Good English communication (written and verbal) and interpersonal skills.

---

作者: ranica    時間: 2013-1-15 03:44 PM
標題: APSE manager
A famous IC company
* u+ Y: k9 _! L, H' S6 O, s* g  ]
职位描述
APSE is chartered to develop and deliver world-class high performance, high quality and complete software solution for various smart phone and consumer electronic products based on our microprocessors. With company’s business and R&D expansion in China, we are looking for talented software managers, leaders and engineers to support and share the opportunity of our growth.
( E- D3 F+ f! E5 W6 e- A" ]
Specifically, we are looking for one manager to lead Nanjing branch, which currently have about 10 software engineers. That manager is expected to lead the team on Android phone software development and maintenance, coordinating with both China and U.S. teams and supporting customers on demand.
0 w) C' m% |( M- ]0 @( y% n) T- N
9 _- |5 u3 r" w7 R0 R; C职位要求
% B7 h' L5 I" m/ _# S$ w. HMS/BS in electronic engineering/computer science (or equivalent) with 5+ years of software design and development experience.
) W- B# `, j& X& z  f' M
: X2 a9 n4 y- g) ^& d3 ^Practical experience of full software product life cycle from definition through software development, design, implementation, quality assurance and release.
; }+ p, K0 e% i: `6 lLeading and management experience during above product life cycle.
# Z/ |( Y, ]6 LKnowledge and working experience on ARM architecture is a plus.
Rich experience in cross-site collaboration is a plus.
Fluent communication in both Chinese and English is an advantage.

---

作者: ranica    時間: 2013-5-23 03:51 PM
模拟电路设计工程师
+ |1 P, a/ P. t2 d8 l& @0 c; f
公      司：NO.154-A software agent company
工作地点：上海

职位描述
负责模块电路设计
& ~# ]1 y6 `  ]/ K+ O
职位要求：
2-3年（硕士）或3-4年（本科）模拟电路工作经验及以上
+ j- l$ D0 |( R) p" r; v' x熟练掌握各种基本模拟电路模块设计
4 ]4 |" M( d0 t$ u$ K有amp及高速接口设计经验的优先
7 u  \7 `  o: U4 \2 F2 y1 t有高压ic 设计经验的优先
有power ic设计经验的优先
6 |1 ?( O) Z0 J良好的团队合作能力

---

作者: ranica    時間: 2013-5-24 01:45 PM
高级IC设计工程师（深圳，西安，北京）
4 J0 k3 C. e( h# |公      司：NO.251-A Product design company
2 n* j' \3 r5 Z
职位描述
1、协助市场部定义产品规格，了解产品市场应用，完成项目的可行性分析
2、带领团队进行产品的模块化和整合设计，完成产品设计和生产相关文件
3、带领和帮助版图工程师完成设计的后端设计
* b7 X1 Y, ?7 P/ x! g4、产品测试和分析
6 a) y4 T9 }7 H& G9 Z( i6 G& B5、对产品问题进行问题分析和解决
# W& c1 r* F9 {$ Q6、协助应用工程师开发应用

职位要求
  z. |3 h: H3 r, m! \  U/ w1.微电子，电路设计等相关专业
2.熟练使用专业相关CAD软件（cadence, synopsys等）
3.5年以上数字或者模拟，混合信号的IC 设计经验；有带领团队开发项目的经验；了解晶圆厂的各种工艺
5 s  t5 v# G% n& k4.英语熟练
5.有产品tapeout经验的；设计过电源管理芯片的；

---

作者: ranica    時間: 2013-5-24 01:46 PM
高级IGBT专家（深圳，西安，北京）
公      司：NO.251-A Product design company
6 Y* |8 O" a* I. E$ O  J# y
2 ~; @1 ?( t& j( p. w职位描述
1.主要从事IGBT产品/模组封装工艺的开发、生产支持工作。
2.优化IGBT封装的生产工艺流程，提高成品率，确保生产稳定运行。
3.协助完成封装方案、产品成本的制定，并负责对相关人员的培训。
4.负责封装工艺质量、产率的跟踪，及时发现问题并加以改善。
5.负责编写封装工艺流程及规范。
6.负责封装物料成本优化。

! U/ B+ y% @3 i0 R职位要求
/ R0 ]- }8 j" M% _& {' o1.半导体，微电子，电路设计等相关专业
( D7 |& ~% m8 C# W( V2.熟练使用专业相关CAD软件
3.5年以上IGBT设计和封装经验；有带领团队开发项目的经验；了解晶圆厂的相关工艺，有后端封装测试和成品量产的工艺质量控制的经验
4.专业IGBT设计和封装的相关经验
5.英语熟练
# g2 E( l, H3 r/ q, i& p, D+ T" y6.在外资公司IGBT领域工作过的优先考虑

---

作者: sophiew    時間: 2013-6-14 03:14 PM
芯片质量工程师 （QA）
' w8 U) n: Q' i8 p" {1 G, |$ ~( G公      司：NO.277-A mobile chipset semiconductor company
工作地点：上海
/ O2 Q% t/ ~7 V# B
/ w, Y+ G- j9 I6 N职位描述

' O9 H( n. O  d5 Q1 U! P/ q1、引导芯片项目按照展讯公司芯片开发或维护流程正常进行；
2 `2 N  C3 k2 e9 `8 m8 q. k2、监控芯片项目的执行过程以及交付输出质量；
3、协助公司不断优化芯片开发和维护流程；
4、使管理层在设计、开发以及其他生命周期阶段能够明了芯片开发或维护项目的质量状态；
3 }9 G2 Q3 @& R- l: I5、协助公司不断优化芯片开发和维护流程；
6、参与芯片设计评审、测试、配置控制、问题报告与解决以及变更控制；
7、推行能够在设计、开发以及其他生命周期阶段检测出芯片设计问题的工具；
8、能够独立承担微流程开发任务。
! Z9 ~/ t: P; F1 L
; B4 w3 i0 F/ P, W/ y- b职位要求

1、通信、电子相关专业本科以上学历1~3年的硬件、芯片QA经验或硬件开发经验；
& g1 x. \% k& B( Q' ?9 R2、参与至少一个硬件或芯片项目完整生命周期活动；
3、熟悉或者了解质量管理理论，包括但不仅限于CMM流程体系，ISO质量体系等；
4 g! d6 s' N, `, x: N7 f4、有通信或电子类专业方面的学习背景；
5、有良好的沟通能力和责任感；
6、有良好的的学习能力和理解能力。

---

作者: ranica    時間: 2013-6-18 11:46 AM
R Application Engineer
公      司：NO.276-A leader in high performance analog and mixed-signal IC design
, F% R3 l. @$ Q% k9 ]- t. W! i工作地点：北京
! G8 D, b, R5 I! C( A6 i4 i
岗位职责：  
1、 与市场销售团队合作，负责公司产品的售前及售后支持，包括拜访客户，帮助客户了解并认可公司产品，客户现场产品支持与调试；  
" w) ~6 \1 `" H( X/ L- U9 ~2、 负责公司新产品的测试板卡软硬件设计,新产品的测试、分析及可靠性验证；协同生产外包部门作供应商的选择及质量管控；  
3、 负责处理客户投诉及产品品质的不断提升；  
! K& }5 Y. }1 J. ^# z: n& p4、 保证公司质量体系的正常运转及不断改进;  
9 Q. ?4 p& w4 w9 C+ x8 H& x5、 根据芯片验证与系统要求制定产品中测及量产测试方案、建立测试环境、编写测试规程、执行测试任务、分析测试数据、出具测试报告;  
6、 设计芯片量产测试流程，跟踪量产测试进展，根据测试数据分析产品良率；  
- t* V4 H9 _# P9 j# ^% ?3 t7、 对客户应用中反馈的芯片问题进行分析解决、维护和系统优化；  
7 Q$ ?; V" {9 V2 h! K/ @/ H8、 完成产品的中测、封装以及成测规范的制定 设计IC测试电路，应用电路的原理图；  
9、 对各个产品的量产状况进行跟踪，及时解决出现的问题维护生产的正常； 针对产品特点，提出相应的可靠性测试方案，并负责测试任务的实施； 对生产过程中和客户使用过程中确认失效的产品制定失效分析方案； 总结实际工作积累的经验，提出适合公司产品的测试规范。

---

作者: ranica    時間: 2013-6-18 11:46 AM
任职要求：  
1. 本科以上学历，电力、电子、通信、工业电气自动化、计算机硬件等专业；  
2. 具有4年以上半导体及相关行业从业经验；  
3. 具有无线通讯基站、直放站、安防监控系统、光端机开发经验或相关市场半导体集成产品技术支持经验者优先；  
4. 具有工业、医疗及仪器仪表等相关开发经验或相关市场半导体集成产品技术支持经验者优先；  
5. 从业集成电路IC测试行业并具有IC测试系统开发经历者优先；  
6. 了解当前IC测试系统的行业背景及技术前沿，并掌握相关核心技术；  
7. 具有丰富的模拟电路设计经验，有模拟及混合信号器件的研发经验,具有高速模拟及混合信号集成电路测试系统的开发经验优先；  
8 F% V1 B& m+ U1 ]+ V' e8. 具有CPLD、FPGA的应用经验，精通FPGA编程及器件仿真等开发经验优先；  
9. 精通Visual C、Visual Basic 编程技术，精通MATLAB、LABVIEW，有上位机系统测试软件开发经验优先；  
10. 有熟练使用网络分析仪, 频谱分析仪,函数发生器,逻辑分析仪,示波器等试验室基本仪器设备经验优先；  
11. 优秀的复杂事务应变能力，能独挡一面，有支持销售团队的经验；  
3 c' G; Y8 I# }6 z9 Y12. 优秀的沟通和谈判技巧，愿意承担一定的压力；  
13. 性格开朗外向，良好的人际交往能力,良好的整体协调能力；  
14. 良好英文读写能力；

---

作者: ranica    時間: 2013-6-18 11:47 AM
芯片质量工程师 （QA）
5 ]( D2 G+ B! e" d1 g0 ~; M; D公      司：NO.277-A mobile chipset semiconductor company
1 m9 I) G! \) X  W5 R工作地点：上海
" m, B2 a: v1 ~5 @' ?
职位描述

1、引导芯片项目按照展讯公司芯片开发或维护流程正常进行；
5 }2 U# {' n, {* b2 j/ }- Q2、监控芯片项目的执行过程以及交付输出质量；
3、协助公司不断优化芯片开发和维护流程；
+ m4 W4 J! W. Q9 @3 g" ~4、使管理层在设计、开发以及其他生命周期阶段能够明了芯片开发或维护项目的质量状态；
* P* @5 f2 y8 C+ a$ [5、协助公司不断优化芯片开发和维护流程；
) S1 ^+ R+ g) [" C, H/ b9 ~6、参与芯片设计评审、测试、配置控制、问题报告与解决以及变更控制；
1 C- O/ ~. j; M6 C( s- |7、推行能够在设计、开发以及其他生命周期阶段检测出芯片设计问题的工具；
0 q+ j7 i' [: T4 l6 b: N8、能够独立承担微流程开发任务。
9 Y& V  e( y; i0 w
职位要求
' s" n( v) k  O4 U1 @6 Y
% [7 k& f# H8 K8 w3 o1、通信、电子相关专业本科以上学历1~3年的硬件、芯片QA经验或硬件开发经验；
2、参与至少一个硬件或芯片项目完整生命周期活动；
6 X, R/ K: }. \7 o( j3、熟悉或者了解质量管理理论，包括但不仅限于CMM流程体系，ISO质量体系等；
% r6 Q% B' L$ z* Z( p6 Q8 o4、有通信或电子类专业方面的学习背景；
! a8 L- s) T5 Z! I5、有良好的沟通能力和责任感；
. {0 t( L& h8 _6 e4 |- y6、有良好的的学习能力和理解能力。

---

作者: ranica    時間: 2013-6-24 09:43 AM
Application engineer

公      司：NO.89-A famous IC company
工作地点：上海

5 e. w' }3 ?6 o) L+ q( y职位内容：  
  T/ ~/ Y2 ^- p6 d  ]& |·         Reports to the GM-VP of Sales for China olutions.
·         Work on a two-person team.
# G4 @  q7 f% z$ O·         Work with sales to evangelize the company.
+ Y. W, B0 b; G0 w, ^·         To cooperate with FAE for customer discovery.
·         Handle different customer situations.
; [' h5 M8 U% `$ r·         Understand and own customers’ problems.
·         Drive success through customer relationships.
8 P  m3 A, `' ^" M·         Formulate the technical value proposition for customers.
1 R7 M% n/ ?. r" A; E. T) z* y·         Work with applications and factory engineering.
5 }, w, d/ `. s; u* u# w5 a1 a  J·         Leverage internal team to solve the customers’ problems on time.
' g( u3 P/ v! T·         Develop and deliver technical presentations and product demonstrations

---

作者: ranica    時間: 2013-6-24 09:43 AM
职能：
/ G" a7 x3 U. b0 q& a( v. J! m$ U·         Feasibility analysis and solution proposals for ******ASSP Product line, discussing with Customers architecture requirements and related trade offs.
! ^0 B0 I& G0 n  b·         To ensure Customer’s requirements are investigated to determine product applications, problems are investigated and resolved, and technical interface between Customers and Engineering.
·         Technical product presentations, Evaluation Kits & Products demonstrations during the discovery and advocating process.
0 q6 G: V3 G& q·         Contribute to Evaluation Kit Specification, design and validation (MRD/PRD process, PCB Design, Ev.Kit productization, Collaterals generation)
5 v: P, s/ t4 h$ g- ?·         Support Field tests and Certification process for specific IP-Standards  
2 l) W% S7 Q& |4 q7 T3 D0 s( l( K·         Support Customers benchmarks  
·         Provide Customers feedback to ***** for new and emerging technologies, as well as competition information
·         Support of exhibitions, road shows and conferences  
·         Identify and assist in research of Sources of  IPs  
* [' A; y8 ~$ Z5 [·         Develop technical Product and Evaluation Kits Collaterals (Manuals, System Solution Application Notes, White Papers, etc.)
·         Develop training & Collaterals material (Presentation for Sales)  
  t$ X- k3 o+ ~3 o+ ~·         Education & Skills
# B) y; S) ^8 F" Qo        BSEE is required (advanced degree preferred).
o        More than 8 years working experience in electric energy meter design.
4 j7 m5 a5 y! q1 z1 i2 ~9 Qo        Expert on software design based on ARM platform (such as ARM926, Cortex-M3, Cortex-M0).
2 j% \0 c$ I% O6 H/ eo        Hardware prototyping design for electric energy meter based on **** SoC platform.
o        Familiar with metrology / power-line communication / low-power radio frequency technology.
5 j  f# s8 Q; u2 b" j# b' x  }o        Familiar with digital signal processing.
o        Fluent Speaking/Listening English skill, and good read/write in English.

---

作者: amatom    時間: 2013-7-16 02:10 PM
Sr Analog Design Engineer

; N& U. {3 V4 e/ x! C& j% W: e公      司：A famous IC company
" W% t* B1 u, |, T) T, ?& v工作地点：上海

8 n1 y6 }! Q7 n8 s8 W- m& c) T$ ]Responsibilities:
• Implement critical analog circuitries, such as charge pump, bandgap, reference voltage/current, ADC/DAC etc., for memory operation
•        Perform transistor level simulations for functionality, performance and optimization
•        Perform block level and full chip level simulations using mixed-signal simulators
•        Define, design and verify architecture for embedded non-volatile memories
6 X- l( n( R" C8 c" n1 N0 y•        I/O design experience a plus
•        Other duties as and when required.
. ^. l: |6 V! ~/ A$ u
; F& d( u8 |! L" oMandatory Skills:
: ^. s7 Q- b, P9 A3 H•        Must be good at problem solving
3 ^1 x1 p4 h- ?+ X" z; }•        Must have the ability to communicate effectively with different levels of employees/customers
•        Knowledge and ability to use computer tools such as HSPICE, SPECTRE, digital simulation(NC-verilog), mixed-signal simulator, static timing analysis and test generation
- O* q+ f3 i0 C•        Knowledge of layout verification tools and debugging techniques
•        Some knowledge of digital RTL design and logic synthesis preferred
2 @% P0 S! ?( T* Y6 }0 Y0 c
; |! Y1 p$ f5 C1 R$ p, z- Q' t( C5 xEducation:Bachelor Degree or higher preferred
Experience:Minimum of 4 year’s experience in R&D center in Semiconductor field
Position:Regular
9 {" O3 a- l) kShiftay

---

作者: ranica    時間: 2013-7-23 02:16 PM
模拟工程师
2 E9 r: ?6 M, p; \  R0 W
公      司：IC设计公司
工作地点：深圳

职位要求
* f3 r( y4 u" j0 T; j- v# _" y1、 具备扎实的模拟电路理论基础，熟悉CMOS工艺制程；
2、 精通Class-AB运放，charge pump，LDO，Bandap中的一种或几中模拟模块设计；
3、 能够指导后端版图设计；
4、 至少3年以上LCD模拟电路设计经验。

---

作者: ranica    時間: 2013-8-16 01:34 PM
Software Applications Engineer

公      司：A famous IC company
工作地点：上海
- B/ l+ E; f/ a3 E$ D
职位描述
# }( I. k8 ~" k/ t1 O- n" D* a* WApplications Engineering role
1 v' {- |+ ?' R9 ^3 F$ x9 w! kYou will be required to gain a good knowledge of software development tools, boards, processor cores, and other products through close working with the worldwide applications engineering teams and  Product Engineering group. Then to use this knowledge to provide customers with the assistance they require to develop systems around the processor contained within their new products.

/ P" J4 @6 v" A) AThe transfer of your knowledge will take a number of forms. Firstly, you will need to be able to provide comprehensive responses to customer enquiries. Such enquiries may be received by email, telephone or face to face meetings.

. i& L) W9 _: h; m0 |Secondly you will be required to provide in-depth technical training to customers. You will therefore be expected to be able to travel every six to eight weeks. You will also be expected to have excellent interpersonal skills and be a good presenter.
0 L: Z: ?$ P  E% [6 v. V  D
Thirdly you will be responsible for the generation and review of new product documentation, such as application notes, frequently asked question lists and user guides. This may include translation for local language support.
: H; {5 C. ^& ^2 A! o
Finally, you must be reactive to the demands of both customers and sales and feedback requirements to Engineering and Marketing groups.

---

作者: ranica    時間: 2013-8-16 01:34 PM
职位要求
Qualifications
Good university degree, in Computer Science or Electronics Engineering ideally, although other science graduates would be considered if they have relevant experience.
2 M4 o( b3 Z! B- M
Experience
Minimum of 2 years industrial experience
Strong C/C++ coding and debug skills – preferably using GCC,  compilation tools, or MS Visual C++
A good understanding of the interaction between software and hardware
1 ]- ~; a% ?3 _: H. E; VExperience of microcontrollers/microprocessors

2 T: t2 W3 F! ]Desirable
Professional experience of customer and sales interaction – ideally in a Technical Support role - as well as development work
Knowledge of XX architecture
Hands-on experience developing for embedded platforms and/or real-time operating systems
Experience of design, development and debugging of embedded development boards.
Experience of interacting with colleagues outside of China
- c* y+ \" D# m3 m# v' `1 l
Personal Requirements
9 `  M! u8 ^$ IMust have excellent written and verbal communication skills with both colleagues and customers, including good written and spoken English
Must be proactive in obtaining engineering or management input, in order to complete project and internal tasks in a timely and accurate manner
  _; u( `0 ?: I# p* p7 l  SMust have the desire and ability to solve problems quickly
Must be enthusiastic and well driven
Must be able to schedule own workload and plan tasks – based on both internal and customer requirements.  
3 L9 I/ S. Y+ w# R4 H5 |Must have good inter-personal skills, and be able to work well within a team; especially when under pressure
Must be willing to be flexible and accept new challenges
  Z' K: t, m: s+ L5 _Must be able to travel on a regular basis, both to give customer training and also for internal business reasons.

---

作者: ranica    時間: 2013-8-16 01:35 PM
Senior Applications Engineer – Software
4 p/ o5 u/ E- B, }; a9 \& S
公      司：A famous IC company
; H* j6 S) T4 l; p; J# m6 J4 [# c工作地点：上海
- v8 w- s3 P3 a/ M! S' q
Key Accountabilities
/ `) ?- N% m& T- g1 i$ x! C  XWork with  Processor Software design teams and Compute Subsystem teams to gain in-depth knowledge of our  Architecture, our IPs, MPCore™ and big-LITTLE™ technologies and tools to support debugging and optimization  
2 y( u3 O. F: s, p7 |$ u- ?Provide feedback to the design teams on potential product improvements & enhancements
Participate in big-LITTLE™ technology design projects and enablement activities  
Work with our Services Division to ensure that quality support and training is being deployed to the satisfaction of our lead partners
Prepare and maintain material for lead partner support including training materials, white papers and application notes
Work directly with lead partners delivering training, support and hands-on system design assistance to ensure that their goals are achieved.
' s# U$ W' L: p' D: K
; _% Q8 A* l, Z$ IEducation & Qualifications
Qualified candidates will have a good university degree in Electronic Engineering, Computer Engineering or other relevant technical discipline.

---

作者: ranica    時間: 2013-8-16 01:35 PM
Essential Technical / Professional Skills
7-10 years of software development experience including experience with recent  based implementations
General Linux BSP skills – from platform drivers to frameworks, with strong experience in kernel/driver and application debugging
Understanding of Android''s interactions with Linux particularly around thread priorities and basic APIs
  h5 {: j( i, ^$ R6 SLow level embedded development and JTAG debugging experience
Strong scripting for enabling workload automation
Understanding of power management systems
Experience of working closely with customers, providing technical support and training
Ability to think under pressure, especially in front of customers and to provide logical and accurate problem analysis
$ M/ [( r+ q; Z! @# A0 Z1 XGood spoken and written English

Desirable Skills & Experience
* Z( P5 t* f8 k. A8 g! }Experience with open source software development
) a. l$ n6 {2 i# @% F& qExperience of software optimization by tuning source code and compiler options
Knowledge and experience in working with MPCore™ based systems
- a! l0 x/ b! W$ u% FKnowledge of  technology, culture and the business model
6 W; a7 [" z* h. NUnderstanding of system architectures and end market applications.
: w% q' ]* _, E% W$ x1 S& p5 l: K8 \
; l( v1 u8 N, H0 A1 O7 v0 gPersonal Requirements
Excellent communication skills: listening, understanding and persuading  
Highly self-motivated with the ability to effectively work alone as well as in a team
8 V& L$ E) T0 o9 R7 Q5 GMust have the desire and ability to solve problems quickly.
Demonstrate a positive attitude and respect for all members of the team
2 i* [5 z* F" K+ hBe motivated to continuously develop skills and accept a variety of responsibilities as part of contributing to the team’s success
Willingness to travel including US, UK, India and China, spending significant periods of time on customer sites and for learning trips.

---

作者: ranica    時間: 2013-8-16 01:36 PM
Hardware Applications Engineer – Cores
  h+ R0 q6 Z0 a* B  n! R6 i
公      司：A famous IC company
7 ^0 I6 j5 z7 H. n( T工作地点：上海

( N* k( I. c1 {& @3 |0 XQualifications
5 @/ Y2 K$ Y* V1 N9 xGood university degree, in Computer Science or Electronics Engineering ideally, although other science graduates would be considered if they have relevant experience.
. k6 ^3 K: V, [, E1 o
Experience
Minimum of 2 years industrial experience
% p& R2 @  |  V2 Z( h, b! U4 n" r' Q; hStrong understanding of microprocessors
; D9 T5 d3 p7 F+ Y9 NExperience or knowledge of FPGA or ASIC design, simulation and/or verification techniques, including RTL coding and simulation, in Verilog or VHDL
0 _+ d9 O5 l. R, s* R+ _/ l( }* xUnderstanding of FPGA or ASIC implementation flows (synthesis, scan insertion, layout)
A good understanding of the interaction between software and hardware
1 S6 V, w3 y+ J- s; v8 J# M- I+ G: r4 YDemonstrable experience of problem solving and debug skills
; D5 q3 z, o6 t, `4 \8 yExperience of interacting with colleagues outside of China

---

作者: ranica    時間: 2013-8-16 01:36 PM
Desirable
- Y8 Q( P7 v, C3 oProfessional experience of customer and sales interaction  
# I, E1 B" w& I! [+ y' P" N0 V* k. TKnowledge of XX architecture
C/C++, assembler coding or other programming skills.
$ q% E  g$ h/ m8 d9 ]8 L, zExperience in integrating SoC peripherals

Personal Requirements
Must have excellent written and verbal communication skills with both colleagues and customers, including good written and spoken English
. `7 j$ C' e: D0 Y8 E; h* OMust be proactive in obtaining engineering or management input, in order to complete project and internal tasks in a timely and accurate manner
Must have the desire and ability to solve problems quickly
' g$ Y/ K+ _3 SMust be enthusiastic and well driven
) S' C9 F& z# A' A# bMust be able to schedule own workload and plan tasks – based on both internal and customer requirements.  
Must have good inter-personal skills, and be able to work well within a team; especially when under pressure
Must be willing to be flexible and accept new challenges
: r  M; d7 R7 J% D6 S8 `6 JMust be able to travel on a regular basis, both to give customer training and also for internal business reasons.

---

作者: ranica    時間: 2013-8-29 10:04 AM
Application Engineer

公      司：A famous IC company
工作地点：上海
$ `1 g, u$ T  M+ ~
职位描述
The Applications Engineer (AE) interfaces with Sales, Marketing, Product, Test and Design
0 Y, z+ x5 F, c6 L2 @, G& [
Engineering with a focus on customer application related tasks for new and existing products.

! X# L5 [0 t! {/ Q9 O; E• Support customer applications and product development to support the sales of industrial power products.

• Design, build and test custom demonstration and reference design circuits to meet customer specifications to support the sales of the portable power product line.

•Create demonstration boards with GUIs/software which will be used by customers to evaluate Portable Power products.
, c1 b; h: J1 p9 v6 v( o) K9 |
• Provide input and help prototype new product definition.
4 h9 ?1 v6 D4 A
0 k0 c' s2 ~0 |( y, o- w• Perform Lab test and measurement of analog/power management circuits.

5 e& `5 k; Z0 z* Q Design and assist building application test fixtures, device evaluation and demo boards including demo board instruction manual/datasheet. This includes management of  personnel involved in printed circuit boards, acquisition of components, board assembly and circuit troubleshooting.
  ]2 L) N( z0 K) ^# `
% T1 o) E+ {7 _% R+ C7 v• “Road Test” products based on “New Product Applications Evaluation Check List”.

! z  k3 Z0 ~" V. D( ^( [4 \% n* w• Direct contact with customers and ***** field application engineering staff for creating design solutions and troubleshooting system design problems.

# w# ?. a2 U7 E, F9 {• Write product datasheets with applications section, applications notes, design articles and demo board manuals with all text, graphs and diagrams.

1 A# S- r  z1 y0 J: ?- p+ |) X• Participate in team meetings; assist product planning team with characterization plan.

---

作者: ranica    時間: 2013-8-29 10:04 AM
Desired Skills & Experience
. d1 F2 e6 U$ L+ l; M9 f4 s+ \We are looking for highly experienced candidates with experience in Power Management Applications & Product Definition. Some of the key requirements include:

6 I0 K; H6 N) m, v4 f$ b: y• BSEE or equivalent working experience.
3 J5 Q2 [$ N+ q3 }' x3 Q& H4 ?) o
  K# V: N7 N) M% P8 g/ k• 5 - 7 years experience with power management applications in the area of board level DC-DC applications.
, l7 a1 Q. X% L& F1 Q. k3 I& s
• Significant experience directing or performing layout of high frequency DC-DC switching converters using Cadence or equivalent software.

$ @5 v$ @9 Y3 L0 k% q• Strong knowledge of circuit design, power system design and PC base software.

4 i6 E0 {0 f4 v/ v• Strong Analog circuit design skills and medium Digital hardware desig skills.
9 X, L: L7 F3 s+ G( m+ K
• Strong lab test and measurement skills required to characterize new products and design application circuit solutions.
4 p* u. d# d2 p  Z. H
• Reasonable proficiency writing simple non-production code in a high level language such as C++, C#, Visual Basic
8 z- D' x3 J/ b$ M/ c: |
• Experience with serial communication protocols such as I2C.

• Strong communications skills and open to travel as necessary.
9 h. L8 @) I. [/ D
• Good writing, technical drawing and verbal communications skills are mandatory for writing product datasheets, documenting lab reports and creating product application notes.

# s8 N3 {3 ]" x; |. g• Proficient with test equipment such as oscilloscopes, electronic loads, spectrum/network analyzers and other common lab instruments.

: C& k1 n7 _9 b9 J0 }• Working knowledge of printed circuit board layout and fabrication as well as electronic assembly practices.

& X; J$ Y: N2 b- |' @: ~% x/ [• Able to use soldering equipment and have knowledge of hand assembly with SMT devices.

. x" j3 F. o3 ]" L• Proficient in writing technical documents and datasheets and creating technical drawings using MS Word and Visio.

---

作者: ranica    時間: 2013-9-10 02:41 PM
標題: Staff Analog Design Engineer
公      司：one famous IC company
4 _4 z) Q' o  M9 K! f; W( J工作地点：上海

' U) w, Y' |2 v2 Y2 rResponsibilities:  
--Work with design team for new product development & assist layout designers with product layout, conduct lab experiments and bench testing and evaluation;
& g+ t9 ~, Z% u* ?/ P8 K--Support test & product engineer with chip debugging, failure analysis, characterizations and product release efforts. Assist vendor to support ongoing product development.
: E  p' D2 k: j% c- F# w
Qualification:
) J: j  l: A: |) w2 x0 @--Minimum BSEE/MSEE preferred;
% M2 K6 J$ F+ S' \7 y. |--4+ yrs. of experience on analog IC design area;
* ~( M9 P. R& }) |, q$ B9 B7 L--Knowledge of MOSFET physics, semiconductor process and layout;
5 p: k2 [2 R$ W--Experience in analog blocks design, such as voltage reference, opamp, comparator, etc;
--Experience in PLL design is must to have;
  p5 i  }& C- d! h! F$ S0 K--Familiar with CAD tools, such as schematic capture, SPICE simulator (or equivalent transistor level circuit simulator) and Virtuso;
--At least one design finalized in silicon preferred.

---

作者: amatom    時間: 2014-6-20 09:01 AM
高速模拟集成电路设计工程师

公      司：A semiconductor company
工作地点：上海
( I% l. _; Q* R5 u. _; y- o8 t
职位描述：  
& ^6 o- A: p! H1 b. |1、负责高速模拟电路的设计、开发、优化；  
  M% _! X$ K  c; I2、版图的设计及验证；  
( _- B0 X5 U8 M& e+ I4 ?3、电路版图参数的提取及后仿真；  
. J; ]6 P; Z% Z; {! `4、芯片的测试和分析。
8 g. P3 {/ i% ]3 `
职位要求：
6 P, d' f/ D5 h! a* M5 f1）微电子、集成电路相关专业硕士或博士学位，或学士学位3年以上模拟IC设计经验；  
2）熟悉和掌握模拟集成电路及版图设计的原理与技巧；  
9 ^* u& ]+ ]3 Z0 I7 \3）有通信系统用集成电路芯片设计和成功投片经验；  
) Y* a+ \: @0 z* P0 i- D4）善于沟通、工作踏实、责任心强，具有良好的团队协作精神；  
5）有下述项目经验者优先：高速锁相环(PLL），时钟数据恢复电路(CDR），调制驱动电路，宽带放大器，限幅放大器，跨阻放大器等；

---

作者: amatom    時間: 2014-6-20 09:02 AM
设计经理
% P% g/ n" G; k) z& f! {8 q9 N
# K9 |# r( @- X公      司：A Semiconductor Company
工作地点：上海

岗位职责：
! i5 t& B$ a. w+ G1.     协助参与新产品定义和系统设计、仿真，提供产品成本分析。
, I" Q# c8 {4 w: I; z/ Z4 ?: D7 i2.     组建产品开发团队，并负责保证产品开发能按时达到各个Mile-Stone，最终确保产品能按时送样并投产。
# O* a% H1 {* N, p6 U3.     指导设计工程师进行模块级和芯片级设计、仿真，指导芯片版图设计。
4.     与测试部沟通，及时提供标准格式的中测，成测规范。  
5.     与应用部沟通，提供详细的系统应用测试计划。
6.        产品转为批量生产后，完成项目开发总结，负责将所有的项目文件及时归档。

职位要求：
集成电路设计专业硕士研究生以上学历，三年以上BLDC（无刷直流）电机控制芯片设计经验，熟悉BLDC控制算法。  
熟练地设计常见的模拟和混合电路，包括Bandgap，OPAMP，Comparator等。深刻了解各种半导体器件的物理特性和版图要求。  
  \4 K, R- n) T' F2 |8 g了解常见的工艺、设计、量产测试和系统应用上的问题，能有效地指导工程师进行设计和解决技术难题。  
4 Q3 F" G$ N# X7 v9 o0 a3 C必须有独立设计并大规模量产2个以上芯片产品的经验。  
/ L& h  q( |" ^有优秀的人际沟通能力。  
$ T2 |- ^: z1 \& h1 K) C& a8 M  e7 T6 L, r出色的项目管理技能 。

---

作者: ranica    時間: 2014-10-20 11:27 AM
Application Engineer
公      司：A famous IC company
工作地点：上海

Responsibilities:  
1) Production Support  
- Support new device ramp-up.  
- Application support (e.g. yield improvement, test time reduction)  
- Production troubleshooting.  
- Customer training (customized workshops).  
4 {- r4 O# @3 j" \- B- Account management: relationship building, issue tracking, escalation and communication.  
: W0 v9 u4 ]! q
2) Pre-sale Support  
- Understand market, device technology and competition trends, provide inputs to sales for Verigy product positioning strategy.
- Collect local market / accounts / applications data, analyze and identify opportunities.  
- Understand customer’s technical problems, create and drive account penetration strategy.  
- Support sales in technical discussions, theoretical benchmarks and customer presentations; help preparing proposal and tendering documents
1 `6 p6 j- K( x2 l  L- Support marcom events like SEMICON show, seminars, etc.

---

作者: ranica    時間: 2014-10-20 11:28 AM
3) Solution Development and Project Management  
; U4 L/ e( X9 s- Track account roadmap, analyze customer’s test requirements and provide competitive test solutions.  
- Test program development and project management.  
, S& f  ^+ n9 E7 M- Device correlation and test program release at customer site.
职位要求
Minimum Qualifications : Qualifications:  
3 o+ O' j, V2 z5 h4 S- n" S) [- Demonstrated personal leadership skills & strong team contributor.  
- Master degree or higher in electronic, electrical engineering, Automation or related discipline.  
) s7 y2 a; ~9 s* T5 `1 g* X- Has more than 2 years Project management experience  
" z) x3 O7 m. U  y: n7 z- 4 years experience in semiconductor test application development, application support, IC design, or test engineering.
- Familiar with C/C++, Java or other programming languages.  
- Fluent in English.  
4 q1 _0 M5 ]% R7 o- Good communication skills.  

Preferred:  
- Knowledge in semiconductor design, manufacture and verification for SOC, logic, memory, RF, processors or ASIC devices.
0 t0 g% h$ Y: B- z& {- Experience in using Automatic Test Equipment platforms (for example, Verigy/Agilent, LTX, Teradyne or Advantest), especially in mixed-signal and RF applications.  
- Pre-Sales skills and direct customer interface experience.

---

作者: ranica    時間: 2014-10-20 11:31 AM
Product Business Development Manager
公      司：A famous European IC company
工作地点：上海
: U% ]! b; h2 x' Z& q  X" S
Roles and Responsibility:
- Promote the product at customers and sales partners; cooperate with sales at developing customer specific promotion strategies.
* M; b; _6 y# F; Z- [2 A- Introducing new product into new market.
- Provide customer, market feedback and requirement to PM and proposed product features for better market coverage
- Secure orders and achieve sales per budget and sales forecast.
3 F; N1 A- S" J! p7 f2 y7 b- Focus on business development with major customers prospects
8 j7 `4 Z& g% J; d( I- Develop and drive a business plan which includes focus account profiles and penetration plans, that support the system solution of customer needs as determined by the long range market segment business plan
- Regional travel is expected to ensure relationships and business opportunities are being developed

Qualification requirements:
' h; r; C' Y5 x* F! p4 }- W/ r- Proven track-record(5-7 years plus)of success in business and/or commercials roles in CE production
+ B% z0 M' R8 L9 K6 u- Experience in sales and/or marketing/product marketing and /or business management
- Experience in consumer electronics industries including mobile communications, wearable device and digital media
- Must be an effective communicator with the ability to interface at all levels within the skills, high credibility. Good social skills, ability to establish open communication

---

作者: ranica    時間: 2014-10-27 12:16 PM
solution manager
0 S! t" i! k/ Y5 m- g3 d  j公      司：A famous IC company
7 ]6 C5 }; R' x6 [$ A) Z工作地点：北京
/ w. B& s) K+ y; f: W* M) G! [; Z
- Z+ G+ Q5 j7 P6 j* ~+ dResponsibility:
% F# P. D& S4 W* g1. Work together with Sales/Business Operation team for forecast and shipment driving;
7 t! v3 K/ V+ M7 @& e4 j2. Coordinate projects prioritization and resources together with HQ BU/AE/RD;
+ o  l5 |5 b3 y+ _% D9 X3. Promote our solution to customers together with sales;
+ S4 G' ^: |1 k2 j. V' T  L) t/ p4.Support Marcom for solution advantage and success story advertising;  
5. Competition analysis;
' C4 R9 V# ?$ Z& h3 p9 w" B% G6 y$ j5 I6. Build IOT eco-system;
7. Support BU/RD for product & solution def.

Qualifications:
$ u7 w  D- ?! ~" C9 c3 k+ j1. At least eight years working experience in wireless and connectivity area;
" x6 L% n+ @: L& x* v2. At least three years working experience in product/solution management or relative works;
6 H  P% \" u+ b( D+ O- W: `  ^; ~3. Good communications skills with customers, peers and team members;
4. Strong technical background in IoT, smart home, wireless connectivity,
" @: O( q1 r& U5 D( f5. Willing to travel and work at customer site to drive customer communication and promote XX’s solution/product;
6. Must be aggressive, self motivated and result driven.
/ u+ C  `# Q2 G* |* e+ \- k7. BS in EE is required.  MS is preferred

---

作者: ranica    時間: 2014-10-27 12:16 PM
Manager/Sr. Manager, wireless communication
公      司：a leading developer of advanced digital imaging solution
工作地点：上海
5 Z6 T4 y+ c1 D4 Z& E
职位描述
8 K6 V1 O1 D( H' JThis is a high visibility position at XX Technology (Shanghai). This position will lead a wireless design team to deliver products to address wireless emerging markets. The candidate will be responsible for developing communication system architecture and driving wireless R&D resources to deliver high cost/performance products. A successful candidate should have strong industrial experience in designing digital receivers/transmitters, and have in-depth knowledge of characteristics of wireless communication systems. The candidate is required not only to lead ASIC design team on design implementation and verification, but also to have the ability to communicate with other teams of various backgrounds, such as RF IC design, software and marketing in order to develop the best architecture for cost/performance tradeoff. The position also bears the responsibility of working with marketing and system teams for product definition, performance analysis and optimization.
: o' _) {( F1 Y8 F# z9 Q) t/ z* r& w
: L& H! Z' y& _1 JRequirements
--- MSEE with 8+ years experience (5+ years for PhD) in communication SoC design, such as Bluetooth, Wi-Fi or DVB-C/S/H.  
; U" t  V0 X! J9 f" k4 u2 z  W; x7 b --- Direct design experience on modulation such as QPSk/QAM, DQPSK/8DPSK, OFDM, etc.  and related channel encoding/decoding algorithms.
3 ]; t% H% }; V# o3 I--- Good knowledge in communication related algorithms, such as AGC, carrier recovery, timing recovery, channel estimation and equalization.
& Q  N; a2 \, n2 B/ n  u' v0 W2 U& o--- Strong knowledge in Wi-Fi (802.11 b/g) and/or Bluetooth is a must. Knowledge of rake receiver, MINO is a big plus
--- Good experience in cost-driven architectural design, system partition and performance analysis is highly desirable
9 h; _( D3 y) c/ ?--- Must have extensive SoC experience from design specification to netlist
* e5 w( n" q  h$ S# l( v' n--- Supervising engineers and conducting chip/prototype (with FPGA) debugging in the lab environment
--- Excellent hands-on experience in system bring-up and trouble-shooting in the lab environment is highly desirable
* D) O- @5 ]6 M' s+ s+ w* d( h. I--- Good experience and understanding of issues related to board level design, grounding, supply decoupling, filtering, spurs sources, etc. is a big plus
8 G2 w& m9 T  z( |# Z+ R2 L9 {! c--- Self-motivated, excellent communication skills and ability to excel in a team environment

---

作者: ranica    時間: 2014-11-25 09:00 AM
Staff Analog Design Engineer (Power Management)
公     司：one famous IC company
工作地点：上海

Job Description  
8 ~+ R2 m, W1 {6 W4 ?! |6 L$ }-Work with analog power IC design team for new product development;
  h  n* H& b. w  N7 I-Work closely with layout designer for layout implementation  
" N$ s9 J! w$ ~) n8 K* Z-Verification of performance requirements using appropriate simulation and verification tools.
9 n, p( X8 K8 a! C5 h-Support test & product team with chip debugging, failure analysis, characterizations and product release efforts;

! E' |9 F# l! c% ~Qualification Requirements
3 I0 i' L& g- _) g-Master degree or above in EE or related field;  
-5+ years of working experience on analog power IC design area;
- X/ t! R! d7 C! E9 i) f# i5 b-Familiar with details of product development: design method, design process, CAD tool, design for test, physical design, system applicant
-Strong experience in power analog blocks design, including LDO, DCDC Converters, Charge Pump, Power Path, etc. Especially on switch mode converter designs.
-Familiar with CAD tools, such as schematic capture, SPICE simulator (or equivalent transistor level circuit simulator), Virtuoso;
* L4 `: `3 p) @% D/ W6 S" v-Understanding of BiCMOS process technologies and device physics
-Excellent understanding of written English and good spoken English
. Z( x( w4 F* r7 ~1 b7 h-Good communication skills and cooperative spirits.  
-Outstanding ability of self-management and attain goal under pressure.

---

作者: ranica    時間: 2014-11-25 09:00 AM
RF/模拟IC设计研发总监
# f: Y6 Z9 A6 V6 @9 _5 w+ Q公      司：A IC design company
  `. m7 r1 c9 c6 {, n! m# c4 d工作地点：北京

职责范围：  
, `# B9 _& S  [9 F1. 负责研发设计部门日常运行和管理，指导研发团队新产品定义、立项、设计、验证；
$ B. H. u. E1 u7 |: ?1 b% s- q7 h2. 负责与市场及销售部门紧密配合制定公司3-5年期产品路线图及相关产品定义；
! d. J" k+ P2 |3. 负责开发芯片系统架构，参考模型，测试计划，测试环境等一整套工作流程；  
4. 负责对多个项目进行人员资源的调配，分配设计任务，加强团队间不同功能的分工合作，提高研发效率；  
. s0 [3 W6 O6 B9 E+ d5. 指导研发团队制定产品测试、应用及标准制定及批量生产；  
6. 负责与EDA厂商合作确定软件购买，新工具的采用等；
. b0 I: @' j/ F7. 负责研发团队建设及人才的引进和培养，以符合公司发展战略的人才需求。

2 ]" b/ L! y1 p任职资格：  
1. 重点本科以上学历，微电子专业，十年以上相关工作经验，或硕士微电子专业，八年以上相关工作经验；
% c) o5 ^6 q2 w, Z' Y, u- q2. 三个以上从概念到量产的全过程的车用芯片的工作经验，并担任过模拟设计部门经理级以上职位；  
1 i8 s# K/ D% j0 L! b- p7 Q/ i7 p! [" @3. 熟悉射频模拟电路产品定义、设计、测试、应用及品质控制流程；
4. 工作严谨、细致、高效、务实，富创新性思维能力，思路清晰；  
2 O0 B6 o/ m) W- Z+ r/ a5. 有较强的成本、品质意识，良好的职业道德和职业操守；
# s- \+ c, A) h4 b& n& e' }6. 优秀的书面及口头沟通表达能力和良好的团队合作精神。

---

作者: ranica    時間: 2014-12-11 11:27 AM
Application Engineer
/ h- {$ f+ `! l" L; [公      司：A design company
工作地点：上海

" |# W% Y8 c* t- KResponsibilities:  
! [5 H+ s9 s3 }% U8 D1. Sensor verification: Work closely with design team to verify each function of the sensor. Evaluate image quality to see if it meets the design target and application requirement. Find feasible system level work-around if some issues can''t be addressed by design.  
2. Provide objective image analysis assistance during various design phases.  
3. Develop a deep understanding of customer systems and use cases, and then work closely with FAE’s, internal and external hardware and firmware developers to develop, optimize and validate imaging solutions.
4. Design demo systems and reference designs, and develop settings, documentation, training and other collateral to complement products. Make special reference design based on customer’s requirement.
7 Z- `, S2 F' _. Z* `; \
- H  |$ n$ U  t3 qRequirements:  
2 c* {3 h7 u& x. @% t5 a1.Master''s degree in EE/CS/Optical Engineering or other related field0-3 years of experience  
& q, D) {. a! i& {2.Direct experience supporting customer is required  
3.Proficiency in C, C++ and / or Matlab coding to design and run simulations for complex image pipeline  
4.Knowledge of image processing algorithms and digital logic design is a plus.  
5.Team player with good communication and presentation skills.  
6.Well organized, methodical, and detail oriented.

---

作者: AIC6632    時間: 2015-10-28 08:44 PM
工作性質還真是多啊
要如何取捨

---

歡迎光臨 Chip123 科技應用創新平台 (http://chip123.com/)

Powered by Discuz! X3.2