為何SDM ADC 第一級anti-alias filter cut off frequency 是20K

aaaach

為何SDM ADC 第一級anti-alias filter cut off frequency 是20KHz??
通常audio digital output sample rate is 44.1/48/96/192KHz
; H( V# C- c; Z; ~but the first anti-alias filter in analog SDM ADC input is 20KHz
+ P7 F# W& G: S& s" B9 p7 `if your sample rate is 192KHz, its fs/2 is 96KHz, 20KHz~96KHz will be attenuated by anti-alias filter
what is the difference with 48/96/192? the signal information is only under 20KHz.
* ]7 m8 v9 e. m' o; T2 c0 Swho can tell me what is the difference in this condition?
and is it really used 20KHz as the anti-alias of SDM ADC for audio?

monkeybad

雖然SDM ADC是用192K當作sample rate, 但是要處理的聲音信號還是在20K(這是人耳廳的到的的頻寬)
& P% z  {. ?/ m7 l4 o6 f8 ASDM ADC是用over sampling的技巧讓SNR提高, 所以sample rate通常會比信號的頻寬要大上許多倍

李鐏鐶

因為人耳能聽到的聲音頻率大概在20hz~20Khz之間.

aaaach

原帖由 monkeybad 於 2008-12-23 11:27 AM 發表
! m% {; F  N$ f" x, {5 `雖然SDM ADC是用192K當作sample rate, 但是要處理的聲音信號還是在20K(這是人耳廳的到的的頻寬)
( u3 x$ ]' W' aSDM ADC是用over sampling的技巧讓SNR提高, 所以sample rate通常會比信號的頻寬要大上許多倍

( n! V) Q8 O. f+ l) b4 H6 c# W
20K is the BW of human hearing,
* J- V; Z5 l  S2 L& w0 }' u7 d$ Lwhat is the difference of 44.1/48/96/192KHz data sample rate in audio when this signal is over 20KHz?
SDM ADC uses over sampling for gaining high SNR. the oversampling rate will be 64/128/256 fs.
, t6 B* S. F9 j" Xthe fs is 44.1/48/96/192KHz.
SDM ADC with over sampling rate is right point, but sample rate didn't have direct relation with SDM.

anita66

這問題也困擾我很久了,不知有沒有大大分享一下心得??或是再說明的詳細一點呢??3Q~

liangshangquan

AAF的cut off freq和sample freq無關，只和信號帶寬有關，音頻應用bw=20~20KHz，SO~~~

lynker

SDM通过过采样来提高ADC的精度，但不可用采样频率/过采样率来理解输入信号带宽，尽管这个频率要大于输入信号带宽。
一般决定SDM SNR的因素有 SDM的结构 阶数 过采样率
0 }9 b& F& O9 Z; C在结构确定的情况下，可以根据性能要求来改变过采样率。

netronix

因為人耳能聽到的聲音頻率大概在20hz~20Khz之間.
. l( \7 C7 i. w! W' H. f8 [5 b所以AAF要是signal bandwidth

ronnie710409

因為無論oversampling 64/128/256, 只要有oversampling, out-of-band noise就會alias到in-band, 所以無論你sampling rate多少的確跟AAF無關, 是跟你的in-band有關係而已.